---
title: "BEAM Central Vacuum Install & Service | Systems of Nevada"
url: "https://systemsofnevada.com/brands/beam-central-vacuum/"
canonical: "https://systemsofnevada.com/brands/beam-central-vacuum/"
updated: "2026-11-21"
breadcrumb: "Home > Brands We Install > BEAM Central Vacuum"
business: "Systems of Nevada, Inc."
what: "residential and commercial security systems, 24-7-365 central station monitoring, fire alarm systems, security cameras, video surveillance, access control, intercoms, home automation, audio and video, flat panel TV installation, structured cabling, central vacuum systems (low-voltage)"
phone: "775-355-0831"
email: "steve@sysnv.com"
address: "1220 E. Greg Street, Suite #4, Sparks, NV 89431"
hours: "Mon-Fri 8:00 am-4:30 pm; closed Sat-Sun"
since: "1989"
licenses: "Nevada State Contractors Board 0042143 (C-2c fire detection, C-2d low voltage) and 0039080 (central vacuum); Nevada State Fire Marshal F 486"
consultations: "free, on-site"
---

# BEAM Central Vacuum Systems in Northern Nevada

Systems of Nevada installs and services BEAM central vacuum systems for homes in Reno, Sparks and across Northern Nevada. That includes new systems, retrofits in finished homes, and repairs to the hoses, handles and power heads that wear out over the years.

Our central vacuum work goes back a long way, and BEAM is one of the central vacuum brands we install, along with Electrolux, Vroom and Element. We hold Nevada State Contractors Board license 0039080 for central vacuum systems, and our own technicians do the installing. Here is what that means for a new system, and for the BEAM you already have.

## BEAM products and parts we work with

### Central vacuum power units

The motor and dirt bucket live away from the living space, so you hear a quiet hush of airflow instead of a motor in the room.

### Lightweight hoses

BEAM says its hose and handle weigh about 7 lbs, where the average portable vacuum is 15 lbs. We install and replace them.

### Handles and power heads

A cracked handle or a worn power brush head can be repaired or replaced, so the system keeps working.

### Wall inlets and tools

Inlet valves are placed for whole-house coverage, with the cleaning tools stored right where you use them.

### Parts and repairs

We source the parts BEAM systems need and suggest further repairs only after checking with you first.

### New and retrofit installs

We design the system for the house, new or old, and run the tubing with as little disturbance as we can.

Key points

- We install and service BEAM central vacuum systems.
- Installation is usually completed in less than one day, and in most cases without damage to the home.
- The power unit can go in a basement, garage, crawl space or utility room.
- We repair BEAM hoses, handles and power heads, and two customers describe those repairs on our client reviews page.
- Our central vacuum license is Nevada State Contractors Board 0039080.
- BEAM describes its hose and handle as about 7 lbs against 15 lbs for the average portable vacuum.

## Why homeowners choose BEAM

The reasons come from BEAM itself, and we are glad to pass them along. According to BEAM, a built-in system removes the air, dirt and dust from the home instead of recirculating it through a portable vacuum exhaust, and it uses larger motors for deeper suction. BEAM also builds in a self-cleaning filter and a large dirt bucket, so there is less emptying than with a bag.

BEAM's lightweight hose means the motor stays put in the garage or basement while you clean. The hose and handle go from room to room and up the stairs.

## Installing a BEAM system

Central vacuum installation can usually be completed in less than one day, and in most cases it can be installed without damage to the home. The power unit can be located in a basement, garage, crawl space or utility room, and inlet valves are placed for whole-house coverage.

Our process starts with a free on-site consultation. We walk the house, plan the inlet locations and the tubing route, and give you a clear quote. If you are building, the best moment is before the walls are closed, which is covered on our [new construction](https://systemsofnevada.com/central-vacuum-systems/new-construction/) page. For a finished house, see [retrofit for existing homes](https://systemsofnevada.com/central-vacuum-systems/retrofit-existing-homes/).

## Repairs for the BEAM you already own

Hoses crack, handles break and power brush heads wear out, and none of that means the whole system is finished. Two customers describe their repairs on our [client reviews](https://systemsofnevada.com/client-reviews/) page. Bruce D. of Reno wrote that we are "very friendly and helpful people" and that we "had the parts needed". Bill of Reno, whose handle had cracked, called it "very good service".

Bruce also noted that we checked first before doing any extra repairs. That is how we work: we tell you what we find, you decide, and the repair is covered by our warranty on repairs and installations. More on this is on the [central vacuum service and repair](https://systemsofnevada.com/central-vacuum-systems/repair-service/) page.

## Planning your system

The right size depends on the house, and a good design saves effort later. A guide to [sizing and inlet placement](https://systemsofnevada.com/guides/central-vacuum-sizing-and-inlet-placement/) explains how we think about it, and [whether a central vacuum is worth it](https://systemsofnevada.com/guides/is-a-central-vacuum-worth-it/) is an honest look for anyone still deciding.

### Sources (1)

- Nevada State Contractors Board : [app.nvcontractorsboard.com/Clients/NVSCB/Public/ContractorLicenseSearch/ContractorLicenseS](https://app.nvcontractorsboard.com/Clients/NVSCB/Public/ContractorLicenseSearch/ContractorLicenseSearch.aspx) (checked November 2026)

Related

[Central Vacuum Systems](https://systemsofnevada.com/central-vacuum-systems/)[Central Vacuum Service & Repair](https://systemsofnevada.com/central-vacuum-systems/repair-service/)[Central Vacuum for New Homes](https://systemsofnevada.com/central-vacuum-systems/new-construction/)[Central Vacuum Retrofit for Existing Homes](https://systemsofnevada.com/central-vacuum-systems/retrofit-existing-homes/)[Is a central vacuum worth it?](https://systemsofnevada.com/guides/is-a-central-vacuum-worth-it/)[Client Reviews](https://systemsofnevada.com/client-reviews/)

## BEAM Central Vacuum: Questions

### Do you install BEAM central vacuum systems?

Yes, we install and service BEAM central vacuum systems in Reno, Sparks and surrounding Northern Nevada communities. Our central vacuum license is Nevada State Contractors Board 0039080.

### How long does a BEAM installation take?

Installation can usually be completed in less than one day, and in most cases it can be done without damage to the home. We confirm the plan with you during the free on-site consultation.

### Can you repair my BEAM hose or handle?

Yes. We repair and replace BEAM hoses, handles and power brush heads, and we check with you before adding any extra repairs. Our repairs are covered by our warranty on repairs and installations.

### Can the BEAM power unit go in my garage?

Yes. The power unit can be placed in a garage, basement, crawl space or utility room, and inlet valves are then placed around the house so the hose reaches every room.

### Does a central vacuum work in an older home?

Yes. We plan the tubing route for a finished house at the free on-site consultation, so an older home can have a central vacuum too.

[More questions and answers](https://systemsofnevada.com/faq/)
