---
title: "Customer Support for Your Alarm System | Systems of Nevada"
url: "https://systemsofnevada.com/customer-support/"
canonical: "https://systemsofnevada.com/customer-support/"
updated: "2026-11-21"
breadcrumb: "Home > Customer Support"
business: "Systems of Nevada, Inc."
what: "residential and commercial security systems, 24-7-365 central station monitoring, fire alarm systems, security cameras, video surveillance, access control, intercoms, home automation, audio and video, flat panel TV installation, structured cabling, central vacuum systems (low-voltage)"
phone: "775-355-0831"
email: "steve@sysnv.com"
address: "1220 E. Greg Street, Suite #4, Sparks, NV 89431"
hours: "Mon-Fri 8:00 am-4:30 pm; closed Sat-Sun"
since: "1989"
licenses: "Nevada State Contractors Board 0042143 (C-2c fire detection, C-2d low voltage) and 0039080 (central vacuum); Nevada State Fire Marshal F 486"
consultations: "free, on-site"
---

# Customer Support

If you are already a Systems of Nevada customer, call the office at 775-355-0831, Monday to Friday 8:00 am to 4:30 pm, or send the form on this page. Tell us your name, the system address and what the system is doing, and we will help you or schedule a technician.

Many service calls start with a beep or a message on the keypad. The notes below explain the common ones so you know what to tell us. If anything ever looks like a real emergency, call 911 first.

## Already a Systems of Nevada customer?

Call the office first: we know your system.

[Call 775-355-0831](tel:775-355-0831)

Key points

- Office: 775-355-0831, Monday to Friday 8:00 am to 4:30 pm
- Have your name, system address and what the keypad shows
- Put your system on test with the monitoring station before any work that could set it off
- Keep your emergency call list current

## A trouble beep or trouble light

Most alarm panels beep and show a trouble message when something needs attention: a low battery in a sensor or in the panel, a lost power connection, or a problem sending signals to the monitoring station. Note exactly what the keypad shows before you silence it, then call the office. Our technicians are known for quick diagnosis; reviewers mention Matt and Jordan for quick diagnosis and fixing the problem.

## Communication failures and old phone lines

If your system still reports over a landline, a phone-service change can stop it from reaching the central station without any obvious sign. We monitor over standard phone lines, internet (IP) and cellular transmission, and we can move a system to a different path. Read more in our guide to [landline phase-outs and your alarm](https://systemsofnevada.com/guides/landline-pots-sunset-alarms/).

## Before work that could set the alarm off

Painting, remodeling, roofing, fire sprinkler or fire alarm work, and even a new pet can trigger sensors. Call before the work starts so the system can be placed on test with the monitoring station, and call again when the work is done.

## Updating your call list and codes

When people move in or out, or a phone number changes, update the list of people the monitoring station calls. If you need help resetting a code or learning a feature on your app, call the office; several clients mention the patience of our staff in walking them through it.

Related

[24-7-365 Central Station Monitoring](https://systemsofnevada.com/24-7-365-central-station-monitoring/)[Alarm System Repair & Service](https://systemsofnevada.com/residential-commercial-security-systems/alarm-repair-service/)[How to reduce false alarms (and the fines that come with them)](https://systemsofnevada.com/guides/reduce-false-alarms/)[What happens when your alarm goes off](https://systemsofnevada.com/guides/what-happens-when-your-alarm-goes-off/)

## Frequently Asked Questions

### My keypad is beeping. What should I do?

Read the message on the keypad, silence the beep if your keypad allows it, and call 775-355-0831 during office hours with what it shows. A trouble beep is often a low battery or a lost connection.

### How do I put my system on test?

Call before the work begins so your system can be placed on test with the monitoring station for the time you need, and call again when the work is finished.

[More questions and answers](https://systemsofnevada.com/faq/)
