---
title: "Switching Alarm Monitoring Companies"
url: "https://systemsofnevada.com/guides/switching-alarm-monitoring-companies/"
canonical: "https://systemsofnevada.com/guides/switching-alarm-monitoring-companies/"
updated: "2026-11-21"
breadcrumb: "Home > Guides > Switching alarm monitoring companies"
business: "Systems of Nevada, Inc."
what: "residential and commercial security systems, 24-7-365 central station monitoring, fire alarm systems, security cameras, video surveillance, access control, intercoms, home automation, audio and video, flat panel TV installation, structured cabling, central vacuum systems (low-voltage)"
phone: "775-355-0831"
email: "steve@sysnv.com"
address: "1220 E. Greg Street, Suite #4, Sparks, NV 89431"
hours: "Mon-Fri 8:00 am-4:30 pm; closed Sat-Sun"
since: "1989"
licenses: "Nevada State Contractors Board 0042143 (C-2c fire detection, C-2d low voltage) and 0039080 (central vacuum); Nevada State Fire Marshal F 486"
consultations: "free, on-site"
---

# Switching Alarm Monitoring Companies: A Practical Checklist

Monitoring & alarms · 6 min read · Updated November 2026

You can usually change monitoring companies without replacing the whole alarm, but check your contract, who controls the panel's programming and how the new company will receive your signals before you cancel anything. Keep the old service running until the new one has received a test signal.

Key points

- Read your agreement for the term, renewal and cancellation steps before you call anyone.
- Ask who owns the equipment and who holds the panel's programming codes.
- Do not cancel the old service until the new one has received a test signal.
- A panel that reports over an old cellular network or phone line may need a new communicator.
- Reno and Sparks permits stay tied to your address; ask the administrator what they need when the company changes.
- We begin with a free on-site consultation and look at what you have.

People switch alarm monitoring for ordinary reasons: a company was sold and the name changed, a contract ended, or the system is older than the paperwork. The mechanics are not hard, but the order of steps matters, because a gap in monitoring is the one thing to avoid. Here is the sequence we would follow at home.

## Start with the paperwork

Find your original monitoring agreement and note four things: the end date, whether it renews on its own, how much notice cancellation needs and what it says about the equipment. If a company has been sold more than once, the contract may now sit with a different name than the one on your keypad. Ask for a copy of the current terms, in writing, from whoever bills you.

None of this needs a dispute. It just keeps you from paying twice or from losing service by accident.

## Who controls the panel

The panel is the brain of the system, and it has an installer code that allows programming. Some panels are set so that only the company that installed them can change them. Others can be reprogrammed by any qualified technician. Ask your current company for the panel make and model and whether the installer code is yours to share. If you cannot get it, a technician can often tell you at a visit whether the panel can be reached or should be replaced.

This matters more than the monitoring price, because it decides whether your sensors and wiring can be kept. Wiring and sensors in good condition are worth keeping.

## The communicator is the usual problem

An older panel may report over a copper phone line or over a cellular unit on a network that has since closed. AT&T shut down 3G on February 22, 2022, and the industry estimated 1.5 to 2 million alarm devices needed upgrading, per [Axios](https://www.axios.com/2022/02/22/att-3g-sunset-wireless-disrupt-devices). If your communicator is tied to the old company's network, switching often means a new one.

Our [guide to monitoring paths](https://systemsofnevada.com/guides/cellular-ip-landline-monitoring/) explains your options, and our [communicators page](https://systemsofnevada.com/24-7-365-central-station-monitoring/cellular-ip-alarm-communicators/) shows what we install.

## Step by step

- Gather the agreement, the panel model and any account numbers.
- Get the new company's terms and any equipment changes in writing.
- Have the new company program or replace the communicator and confirm a test signal reaches its center.
- Only then give the old company your cancellation notice, following the contract.
- Ask for a written confirmation that the old account is closed, with the date.
- Update your call list and passcode with the new center, and tell everyone in the house.

If you want a second opinion on the equipment, our [alarm repair and service](https://systemsofnevada.com/residential-commercial-security-systems/alarm-repair-service/) technicians can look at a panel before you decide.

## The city permit

In Reno an alarm permit belongs to the alarm site, renews every year and runs through the city's administrator, PMAM, at (866) 950-9905. In Sparks the alarm company must notify its administrator within 10 days of a new system, and the owner must register as well. A change of monitoring company is the right moment to confirm your permit is current and that the administrator has the right company on file. The [Reno ordinance summary](https://www.cityalarmpermit.com/fams/City/Reno/OrdinanceAtGlance.html) and the [Sparks alarm page](https://www.sparksnv.gov/police/i_want_to/obtain_alarm_ordinance_information.php) list the rules.

Ask the administrator directly whether a change of company needs any update on your account.

## Questions for the new company

- What is the term, what does it cost per month and what is the cancellation process?
- Whose name is the equipment under, and can my panel be reached by another technician later?
- Which paths does the communicator use, and is there a backup?
- Who do I call when I need service, and who answers the phone?
- How are burglar signals verified, and how are fire signals handled?

Our [local versus national guide](https://systemsofnevada.com/guides/local-vs-national-alarm-companies/) has more to ask, and our [home alarm monitoring page](https://systemsofnevada.com/24-7-365-central-station-monitoring/home-alarm-monitoring/) shows what ours includes.

### Sources (3)

- cityalarmpermit.com : [cityalarmpermit.com/fams/City/Reno/OrdinanceAtGlance.html](https://www.cityalarmpermit.com/fams/City/Reno/OrdinanceAtGlance.html) (checked November 2026)
- sparksnv.gov : [sparksnv.gov/police/i_want_to/obtain_alarm_ordinance_information.php](https://www.sparksnv.gov/police/i_want_to/obtain_alarm_ordinance_information.php) (checked November 2026)
- axios.com : [axios.com/2022/02/22/att-3g-sunset-wireless-disrupt-devices](https://www.axios.com/2022/02/22/att-3g-sunset-wireless-disrupt-devices) (checked November 2026)

## Related questions

### Can I switch alarm monitoring without replacing my alarm system?

Often yes. It depends on whether the panel can be reprogrammed and whether the communicator will work with the new center.

### Should I cancel the old monitoring first?

No. Keep it until the new company has received a test signal, so there is no gap in coverage.

### What if I do not have my panel's installer code?

Ask your current company for it, or have a technician check whether the panel can be reached. If not, replacing the panel may be the cleanest route.

### Do I need to tell the city when I switch companies?

Check with the administrator. Reno and Sparks both tie permits to the alarm site, and an up-to-date company on file helps.

### Will you look at my existing system before I switch?

Yes, our free on-site consultation includes looking at what you have and what can stay.

[More questions and answers](https://systemsofnevada.com/faq/)
