---
title: "Telecom Rooms & Equipment Racks | Systems of Nevada"
url: "https://systemsofnevada.com/structured-cabling/telecom-rooms-racks/"
canonical: "https://systemsofnevada.com/structured-cabling/telecom-rooms-racks/"
updated: "2026-11-21"
breadcrumb: "Home > Services > Structured Cabling > Telecom Rooms & Equipment Racks"
business: "Systems of Nevada, Inc."
what: "residential and commercial security systems, 24-7-365 central station monitoring, fire alarm systems, security cameras, video surveillance, access control, intercoms, home automation, audio and video, flat panel TV installation, structured cabling, central vacuum systems (low-voltage)"
phone: "775-355-0831"
email: "steve@sysnv.com"
address: "1220 E. Greg Street, Suite #4, Sparks, NV 89431"
hours: "Mon-Fri 8:00 am-4:30 pm; closed Sat-Sun"
since: "1989"
licenses: "Nevada State Contractors Board 0042143 (C-2c fire detection, C-2d low voltage) and 0039080 (central vacuum); Nevada State Fire Marshal F 486"
consultations: "free, on-site"
---

# Telecom Rooms and Equipment Racks in Northern Nevada

Systems of Nevada builds the hub of a cabling system: entrance facilities, equipment rooms, telecommunications rooms and racks where patch panels, switches and backbone cables meet. It is low-voltage work done under Nevada State Contractors Board license 0042143.

Every cabling job has a place where it all comes together. In a house it may be a closet or utility room, and in a commercial building it is a room with racks. When that space is planned well, the rest of the network is easy to run and easy to change.

Key points

- Entrance facilities, equipment rooms and telecom rooms are part of our structured cabling work.
- We install patch panels, equipment racks and cross-connects.
- Backbone cabling links floors and spaces, including riser cabling.
- Our telecom rooms and enclosures are environmentally controlled.
- All work is low-voltage, under NSCB license 0042143.
- We also build residential telecom enclosures for homes.

## Entrance facilities

The entrance facility is where outside telecom service enters your building or home. We deploy the network connection points, patch panels and equipment racks that join those carrier connections to your own cabling, so what enters is properly connected and secured.

It is a small part of the building, but a poor one causes headaches for years. We lay it out with room to grow.

## Equipment rooms

An equipment room holds the gear that other people depend on: patch panels, network switches, phone systems and servers. We design and set up that equipment space as a centralized hub for connecting backbone cabling and the building's internal wiring.

That means thinking about rack spacing, cable paths above and below the rack, where power strips sit, and how a technician will reach the back of a rack in five years. A rack that is easy to work in gets worked on correctly.

## Telecom rooms, enclosures and backbone

Larger buildings add telecommunications rooms and enclosures on each floor or wing. These are dedicated spaces where horizontal and backbone cables terminate. We install patch panels and cross-connects there, and our rooms and enclosures are environmentally controlled to protect the equipment.

Backbone cabling ties it together: riser cabling between floors, telecommunications rooms and carrier spaces. Horizontal runs to the outlets are covered on our [network and data cabling](https://systemsofnevada.com/structured-cabling/network-data-cabling/) page.

## Labeling and documentation

A rack only stays tidy if each port can be identified. We label cables and ports so outlets match patch panel positions, and we keep the layout neat. Labels save hours when something has to change.

You can see rack and equipment work on our [project photos](https://systemsofnevada.com/our-work/) page. Several of the cabling and systems we build also support cameras, access control and intercoms, which live on the same network.

## Planning a room in a new build or an upgrade

If you are building, the telecom room is worth deciding during design, because it needs space, ventilation and a clean route for cable. If you are upgrading, we look at what is already there and improve it a step at a time. Either way the first step is a free on-site consultation, and the broader [structured cabling](https://systemsofnevada.com/structured-cabling/) page shows how the pieces fit together.

### Sources (1)

- law.cornell.edu : [law.cornell.edu/regulations/nevada/NAC-624-200](https://www.law.cornell.edu/regulations/nevada/NAC-624-200) (checked November 2026)

Related

[Structured Cabling](https://systemsofnevada.com/structured-cabling/)[Network & Data Cabling](https://systemsofnevada.com/structured-cabling/network-data-cabling/)[Cat6 vs Cat6A cabling](https://systemsofnevada.com/guides/cat6-vs-cat6a/)[Our Projects](https://systemsofnevada.com/our-work/)[Home Networking & WiFi](https://systemsofnevada.com/home-automation/home-networking-wifi/)[Free On-Site Consultation](https://systemsofnevada.com/free-consultation/)

## The spaces and parts we build

### Entrance facilities

Where telecom service enters the building. We install network connection points, patch panels and equipment racks so the connection is secure.

### Equipment rooms

A centralized hub with patch panels, network switches, PBXs and servers, tied to backbone and internal cabling.

### Telecom rooms and enclosures

Dedicated spaces to terminate horizontal and backbone cables, with patch panels and cross-connects.

### Backbone cabling

Riser cabling, telecommunications rooms and carrier spaces, so every floor connects back to the hub.

### Rack layout and labeling

A tidy rack with labeled ports lets anyone change a connection without tracing cables.

## Telecom Rooms & Equipment Racks: Questions

### What is an equipment room?

It is the room or space holding patch panels, network switches, phone systems and servers, which acts as the central hub connecting backbone and internal cabling.

### What is the difference between a telecom room and an equipment room?

An equipment room is the main hub for critical equipment. A telecommunications room or enclosure is a dedicated space where horizontal and backbone cables terminate, often one per floor.

### What is backbone cabling?

It is the cabling between telecom rooms, floors and carrier spaces, including riser cabling, which links the parts of a building to the main hub.

### Can you set up a small rack in a house?

Yes. We install patch panels, equipment racks and enclosures in homes as well as commercial buildings.

### Is telecom room work part of your license?

Yes, it is low-voltage work and falls under NSCB license 0042143, which includes C-2d Low Voltage Systems.

[More questions and answers](https://systemsofnevada.com/faq/)
