In Reno, Sparks and the Truckee Meadows Fire Protection District, a fire alarm installation needs plans reviewed and a permit before work starts, and the installer must hold both a Contractors Board license and a State Fire Marshal license. Outside those areas, ask your fire authority; the submittal details below come from the City of Reno's checklist.
Key points
- In Reno, Sparks and the Truckee Meadows district, a fire alarm installation needs plans reviewed and a permit before work starts.
- Installers must hold Contractors Board and State Fire Marshal licenses.
- Reno's checklist asks for plans by a NICET Level II technician or a professional engineer.
- Reno's checklist asks for battery calculations with a 20 percent margin.
- Truckee Meadows and Sparks have their own fire offices; start with them if you are outside Reno.

A fire alarm is one of the few building systems where you cannot just buy equipment and start pulling wire. The local fire authority reviews the design first. That is good for the building, but it adds steps, and owners are often surprised by what the reviewer asks for. Here is the process as the public documents describe it.
Which codes drive the review
The City of Reno has adopted the 2024 International Fire Code with Northern Nevada amendments. The Truckee Meadows Fire Protection District enforces the 2024 code and the 2024 Wildland-Urban Interface Code, with amendments adopted by Washoe County, and Sparks Fire works under the 2024 International Fire Code as well.
Amendment 907.2.11.8 in the regional set is the one most owners meet first. It says plans and a permit are required before installation, it lets a household fire alarm system built to NFPA 72 stand in for stand-alone smoke alarms, and it requires installers to be licensed by both the Contractors Board and the State Fire Marshal. It applies where a local fire authority has adopted the regional amendments, as Reno, Sparks and the Truckee Meadows district have.
What Reno's submittal checklist asks for
Reno Fire published a fire alarm submittal checklist effective March 18, 2024. It is the clearest public statement of what a reviewer wants to see, and it is a useful guide even if your building is in another jurisdiction, as long as you confirm the local version.
- A design prepared by a person holding NICET Level II certification or a professional engineer stamp.
- A licensed installer named on the submittal.
- Battery calculations showing 24 hours of standby plus 5 minutes of alarm (15 minutes for voice systems).
- A 20 percent margin on the battery capacity.
- Upload through the city's Accela portal rather than paper.
These are Reno's published requirements, not a promise about every agency. We work through the plan review your fire agency requires.
The order things happen in
- Walk the building with a licensed fire alarm contractor to decide what the building needs and where devices go.
- Prepare the design and calculations to the fire authority's checklist.
- Submit the plans and permit application through the agency's process and pay its fees.
- Answer any review comments and get the approval before the first device goes on a ceiling.
- Install, then test the system and schedule the acceptance inspection with the fire authority.
- Keep the approved plans, the test report and the manuals with the building's records.
Review time varies by agency and by how complete the package is, and the reviewers set the timing.
Homes are included
Owners of houses sometimes assume permits are only a commercial matter. The amendment above covers household fire alarm systems too, so a monitored whole-house system that replaces stand-alone smoke alarms goes through plans and a permit as well. If you are weighing that option, our guide on monitored smoke detectors at home explains what the system does.
Why the licenses matter to you
NRS 477.033 requires a State Fire Marshal license for firms that install or maintain fire alarm systems, and NAC 477.345 describes what the Type F license covers. A reviewer or an inspector can ask who installed a system.
Systems of Nevada holds Contractors Board license 0042143 and State Fire Marshal license F 486, and our own licensed technicians do the fire alarm work rather than subcontractors. See fire alarm installation for how a job runs from our side.
Tips for a smoother review
- Decide the use of every room before the design, since the occupancy changes what devices are needed.
- Ask the fire office for the current checklist rather than an old copy; Reno's is dated 2024 and agencies revise them.
- Keep the battery calculation with the submittal and the building file; reviewers return to it.
- Tell the contractor about planned remodels, so the design can allow for them.
Sources (4)
- City of Reno: reno.gov/Documents/Fire/Prevention/2024%20IFC%20amendments%20RFD%20012026.pdf (checked November 2026)
- City of Reno: reno.gov/Documents/Business%20and%20Development/Development%20Services/Building%20Permits/ (checked November 2026)
- Truckee Meadows Fire Protection District: tmfpd.us/fire-code/ (checked November 2026)
- Nevada Legislature: leg.state.nv.us/NRS/NRS-477.html (checked November 2026)

