Systems of Nevada builds the hub of a cabling system: entrance facilities, equipment rooms, telecommunications rooms and racks where patch panels, switches and backbone cables meet. It is low-voltage work done under Nevada State Contractors Board license 0042143.

Every cabling job has a place where it all comes together. In a house it may be a closet or utility room, and in a commercial building it is a room with racks. When that space is planned well, the rest of the network is easy to run and easy to change.

Key points

  • Entrance facilities, equipment rooms and telecom rooms are part of our structured cabling work.
  • We install patch panels, equipment racks and cross-connects.
  • Backbone cabling links floors and spaces, including riser cabling.
  • Our telecom rooms and enclosures are environmentally controlled.
  • All work is low-voltage, under NSCB license 0042143.
  • We also build residential telecom enclosures for homes.

Entrance facilities

The entrance facility is where outside telecom service enters your building or home. We deploy the network connection points, patch panels and equipment racks that join those carrier connections to your own cabling, so what enters is properly connected and secured.

It is a small part of the building, but a poor one causes headaches for years. We lay it out with room to grow.

Rack with three 48-port network switches and blue patch cords

Equipment rooms

An equipment room holds the gear that other people depend on: patch panels, network switches, phone systems and servers. We design and set up that equipment space as a centralized hub for connecting backbone cabling and the building's internal wiring.

That means thinking about rack spacing, cable paths above and below the rack, where power strips sit, and how a technician will reach the back of a rack in five years. A rack that is easy to work in gets worked on correctly.

Telecom rooms, enclosures and backbone

Larger buildings add telecommunications rooms and enclosures on each floor or wing. These are dedicated spaces where horizontal and backbone cables terminate. We install patch panels and cross-connects there, and our rooms and enclosures are environmentally controlled to protect the equipment.

Backbone cabling ties it together: riser cabling between floors, telecommunications rooms and carrier spaces. Horizontal runs to the outlets are covered on our network and data cabling page.

Labeling and documentation

A rack only stays tidy if each port can be identified. We label cables and ports so outlets match patch panel positions, and we keep the layout neat. Labels save hours when something has to change.

You can see rack and equipment work on our project photos page. Several of the cabling and systems we build also support cameras, access control and intercoms, which live on the same network.

Planning a room in a new build or an upgrade

If you are building, the telecom room is worth deciding during design, because it needs space, ventilation and a clean route for cable. If you are upgrading, we look at what is already there and improve it a step at a time. Either way the first step is a free on-site consultation, and the broader structured cabling page shows how the pieces fit together.

Sources (1)

The spaces and parts we build

Entrance facilities

Where telecom service enters the building. We install network connection points, patch panels and equipment racks so the connection is secure.

Equipment rooms

A centralized hub with patch panels, network switches, PBXs and servers, tied to backbone and internal cabling.

Telecom rooms and enclosures

Dedicated spaces to terminate horizontal and backbone cables, with patch panels and cross-connects.

Backbone cabling

Riser cabling, telecommunications rooms and carrier spaces, so every floor connects back to the hub.

Rack layout and labeling

A tidy rack with labeled ports lets anyone change a connection without tracing cables.

Let’s start a conversation.

Call 775-355-0831

Telecom Rooms & Equipment Racks: Questions

What is an equipment room?

It is the room or space holding patch panels, network switches, phone systems and servers, which acts as the central hub connecting backbone and internal cabling.

What is the difference between a telecom room and an equipment room?

An equipment room is the main hub for critical equipment. A telecommunications room or enclosure is a dedicated space where horizontal and backbone cables terminate, often one per floor.

What is backbone cabling?

It is the cabling between telecom rooms, floors and carrier spaces, including riser cabling, which links the parts of a building to the main hub.

Can you set up a small rack in a house?

Yes. We install patch panels, equipment racks and enclosures in homes as well as commercial buildings.

Is telecom room work part of your license?

Yes, it is low-voltage work and falls under NSCB license 0042143, which includes C-2d Low Voltage Systems.

More questions and answers

Our Clients Say it Best

Lou and Gina Park

Posted on Google

Awesome customer service!

Response from the owner

Thank you, Friends! So glad it worked out for you!

Don McCauley

Posted on Google

Owner Steve exceptional response and dispatch timing. Tech Matt A+ for quick diagnosis and fixing the problem.

Response from the owner

Thank you for sharing, Don. We are so grateful for your trust in Systems of Nevada and your kind words for our Team.

Pamela Henning

Posted on Google

Matt and Christian did a great job-thorough and polite. Answered questions and went through the system with me.

Response from the owner

Thank you Pam!!! Our Team is so grateful for you business and kind words for Matt and Christian. We're blessed to have an amazing Team. Thank you!

Shane Templeton

Posted on Google

Jordan was terrific! He diagnosed the problems with our entertainment system, explained what the issues were, and fixed them expeditiously. Very kind and considerate demeanor!

We also appreciated that Steve and Ron responded immediately earlier this week when we reached out and were able to schedule Jordan's visit this week.

Response from the owner

Hi Shane - thank you for your kind words for taking a minute to share...Our Team appreciates your trust and friendship!

Rachel Kuhl

Posted on Google

Had a great experience with Matt at Systems of Nevada Inc. He made setting up our alarm system super easy and walked me through how to use the app step by step. Everything was up and running smoothly in no time. So helpful and professional — highly recommend!

Response from the owner

Hey Rachel!!! Thank you for taking a moment to share your experience with Matt and Systems of Nevada. We're grateful for the opportunity to work with your Family and we truly appreciate your kind words! Thank you again!!!

Mike Puntoriero

Posted on Google

Very prompt and polite service

Response from the owner

Thank you for you kind words, Mike. We appreciate your business!

NANCY KERRY

Posted on Google

Jordan, is great so helpful, kind, knowledgeable and is a great teacher after install installing the new system so we can learn how to use it to its full potential. The company is really great

Response from the owner

Thank you Nancy...we are appreciative of your continued support and we're lucky to have a great Team!!!

Donald Intihar

Posted on Google

I give Jordan 6 stars out of 5! He was quick, knowledgeable, and very friendly. I also appreciate that Steve at Systems of Nevada got to our house quickly to fix the problem. I highly recommend this company!

Response from the owner

Thank you soooo much for your kind words! We're glad you're happy with your video doorbell!

Carolyn Hughes

Posted on Google

These folks are amazing! The system they installed is incredible. Systems of Nevada provides top notch support.

Response from the owner

Thank you so much for your kind review, Carolyn...we appreciate your support!

More Client Reviews - Click Here