Planning Whole-Home Audio

Home technology · 6 min read · Updated November 2026

Plan whole-home audio by listing the rooms you want music in, deciding which should play separately, and choosing how you want to control it. The wiring and speaker locations come first, because they are the hardest things to change later.

Key points

  • Start with rooms and zones, not equipment.
  • Speaker wire and cable paths are the part you cannot easily change later.
  • Decide early between wired amplification and networked streaming players.
  • Outdoor audio needs its own plan for weather and distance.
  • Brands we install include Sonos, Sonance, JBL, Yamaha and Sony.
Round in-ceiling speaker with a white grille

Whole-home audio is easiest to love when it is planned like the rest of the house: where people sit, where they cook, where they entertain. This guide walks through the decisions in the order we make them.

Zones: who listens where

A zone is a room or area that can play its own music. A kitchen and a patio might be different zones from a bedroom, so the party can run without disturbing anyone. List every area you want sound in and mark which ones should play independently.

More zones mean more speaker runs and more control choices, so this list decides much of the project. It is far cheaper to decide now than to add zones after finishing the walls.

Wired or networked

There are two main approaches. A wired system uses a central amplifier and speaker wire home-run from every room. A networked system uses streaming players that connect over your home network and often sit near the speakers.

Many homes combine them: in-ceiling speakers wired back to an amplifier for the main living areas, and networked players where wiring is impractical. Our whole-home audio page covers the brands we install, including Sonos, Sonance, JBL, Yamaha and Sony.

Compare the two

These are general trade-offs rather than product promises.

Compare the two
Wired amplifier systemNetworked streaming players
WiringSpeaker wire from each room to a hubMostly network cable or WiFi
Best forNew builds and remodels with open wallsExisting homes, quick room additions
Dependence on networkLower for the amplifier itselfHigher, so a strong network is important
Adding a room laterEasiest if wire was pulled in advanceEasy if network reaches the room

Choosing speaker spots

Ceiling speakers blend in and spread sound evenly, which suits kitchens, halls and bedrooms. Wall or bookshelf speakers suit rooms where listening matters, such as a living room or theater. Outdoor speakers are built for weather and should be placed with the seating in mind. Winter freezes and summer sun are real in Northern Nevada, so use products meant for outdoors.

If a theater is planned, read our home theater page, since its needs overlap with a main audio zone.

Listening habits shape the design

Think about what you actually play. Background music at dinner needs even, low-level coverage. A weekend party needs volume in the yard. A person who streams a podcast in the garage needs one good speaker, not six. Writing down two or three real evenings in your house helps us place speakers and choose amplifier power for the rooms that matter.

Also decide who else uses the system. A system that only one person can operate is a system that is rarely used; a keypad or simple scene button helps everyone else in the house.

Control and sources

Decide how people will start the music: an app, a wall keypad, a remote or a voice assistant. A wall keypad is welcome for guests who do not use your app. If you want music tied to lighting and TV scenes, a control platform can tie it together, which our home automation page describes.

Wiring and the license

Speaker wire, network cable and control cable are low-voltage runs. Nevada's low-voltage class, C-2d, covers sound systems among other low-voltage systems, as the administrative code states, and our license 0042143 includes it. For new construction, add these runs to the list in our prewire checklist.

A planning list

  1. List the rooms and mark which should play independently.
  2. Choose wired, networked or a mix.
  3. Place speakers with the furniture layout in mind.
  4. Pick how you will control it: app, keypad or both.
  5. Ask for a free on-site consultation and bring a floor plan.
Sources (2)

Related questions

How many zones should I have?

It follows how you live. Many homes start with the main living areas and add bedrooms or the patio later, if the wiring allows for them.

Can I add whole-home audio to an existing house?

Often yes. Networked players are simple, and wired speakers can go in where the walls allow a clean route.

Is in-ceiling or in-wall better?

Ceiling speakers spread sound evenly and disappear into the room. Wall speakers can suit rooms where listening is the main activity.

Will my WiFi handle it?

Streaming systems depend on a healthy network. If your coverage is uneven, address that first. See our smart-home WiFi guide.

Do you install Sonos?

Yes. Sonos is one of the brands we install, along with Sonance, JBL, Yamaha and Sony.

More questions and answers

Let’s start a conversation.

Call 775-355-0831